surface finish Example Sentences

• If plunge grinding is feasible for the part, specify a liberal surface finish.
• Tool cost is moderate becauserapid stock removal and smoother surface finish.
• Second, polyurethane is generally more durable as it is a surface finish whereas lacquer is a penetrating finish.
• Surface finish is important in any plain bearing application.
• Brochure Printing, and surface finish up the!
• EBM technology in terms of resolution and surface finish.
• It can be seen that using finer surface finish, the defects are more pronounced.
• Better quality metal surface finish such as higher Temperature Resistant OSP or ENIG needs to be adapted.
• Surface finish CROSS REFERENCE CHART Common USA name.
• As a result, Polarstar produces a finer, more consistent surface finish more quickly and, because it also has excellent resistance to clogging, it lasts longer, too.
• We want to compare the effect of two different coolants on the resulting surface finish from a turning operation.
• Part size, thickness and geometry are important, along with the hardness, slipperiness and surface finish of the component material.
• At present, mainly used in precast field because of good surface finish, water reduction.
• Cutting fluids provide benefits such as extended tool life, dimensional accuracy and good surface finish, all of which contribute to high rates of production.
• Other types of voids, such as process voids, pinhole voids, and microvia voids, are not caused by the type of surface finish selected, but depend on the PCB design and assembly parameters.
• Poor workpiece surface finish Balance, run-out, vibration Check spindle bearings or other machine components.
• Different grades of PCD are used depending on the requirements of surface finish, life, the material being cut, and the depth of the cut.
• Definitions of machine tool, cutting speed, feed, depth of cut, metal removal rate, surface finish symbols and values, cutting tools and their geometry.
• 'Upholstery' means the combination of interior padding and surface finish material which together constitute the cushioning of the seat frame.
• This was actually extremely quick and easy, and I ended up with a really nice surface finish.
• Dimensional accuracy and surface finish.
• Shower and toilet areas, including ceilings, shall be provided with a durable surface finish to withstand humidity and cleaning.
• Machining surface finish chart, comparator, method, degree, Ra, Rz, RMS As for machining to iron and steel castings, the surface finish smooth degree is also an important requirement.
• Proper release of agent shall be used so that it can be removed without damaging the surface finish of the concrete.
• The multiplication factor depends on the material, the relationship of die diameter to work diameter, the penetrating die form, the penetration per die contact, the die surface finish, and the surface
• PLEASE READ BELOW The surface finish inside the slots of the gear may vary.
• SG Iron has a lower casting temperature than steel and this allows for a superior surface finish and the ability to cast complex shapes incorporating changes of section.
• Greyscale Resins for Prototypes and Models With a matte surface finish, opaque appearance, and precise details, Black, White, and Grey Resins are ready to use right off the printer.
• Due to the fact the number of cycles found is not an absolute value for every run, sometimes outlying data points occur because of outside factors such as material dimensions, surface finish and incor
• According to the Marble Institute of America, a honed finish is "a satin-smooth surface finish with little or no gloss, recommended for commercial floors.
• In this paper, an initial assessment of the quality parameters of the surface finish and dimensional accuracy of tools made by metal casting in rapid prototyping (RP) sand moulds is undertaken.
• Surface Finish: Plain, zinc.
• The builder needs just the right consistency and setting time to cast the required shape and produce the desired surface finish.
• Hardness and surface finish, Brinell and Rockwell C hardness have no known metric equivalent.
• Relation between surface finish and manufacturing process.
• Back boring holders can eliminate expensive dedicated special tools, and face grooving holders allow plunge cutting versus milling, speeding the process while producing a better surface finish.
• Cones with a rough surface finish yield a higher dynamic coefficient of friction than cones with a smooth surface finish, both during and after bedding.
• Diameter, Tensile, Shear, surface finish, Torque are among the areas defining the resultant dowel.
• The size and shape of the sand particles defines the best surface finish achievable, with finer particles producing a better finish.
• The aim of this project in this context is to research and develop non- contact probe metrology solutions for surface finish Measurement of Difficult to Access areas and Internal Channels.
• PET and PETG filaments are known for their ease of printability, smooth surface finish, and water resistance.
• How do we keep them from harming the surface finish of the hole?
• Good surface finish is also a factor.
• PM surface finish and surface density.
• There is an improvement in surface finish and permissible cutting speed as nose radius is increases from zero value.
• Knowledgeable in the surface finish requirements and inspection techniques of reworked surfaces.
• Commercial cleaners may affect the surface finish.
• This occurs due to the collar surface finish.
• The radiation absorption of a body is much superior when its colour is black and when it has a matt or rough surface finish.
• Bear in mind that this method is only as accurate as the surface finish will allow.
• Osteolysis After Total Knee Arthroplasty: Influence of Tibial Baseplate surface finish and Sterilation of Polyethylene Insert.
• By applying layers of wood oil, you are building up a durable and lustrous surface finish that can seal wooden floors and exposed surfaces.
• Exposed screws, where required and approved by the Architect, shall match the aluminum surface finish.
• CHEMICAL METHODS Chemical methods can remove high temperature oxide and iron contamination without damaging the surface finish.
• Cutting gives good dimensional accuracy and a good surface finish.
• The individual chambers are delivered either in a standard all-galvanized type or with enamel surface finish of the outside surfaces on the all-galvanized type.
• Finishability: It should be possible to achieve the desired surface finish.
• These contour crafting techniques provide a superior surface finish when compared to the conventional heuristic methods.
• Surface finish requirements can determine the preferred orientation of a precast concrete element in the mould.
• Codes and the electrode surface finish on here, just decrease transmitter sensitivity, and has many different ways.
• Damage, FOD, surface finish requirements, cleanliness, etc.
• Dressing can produce a dull or sharp wheel surface according to the desired surface finish.
• Is the surface finish even and uniform?
• It deteriorates surface finish.
• The problem occurred on the surface finish of the fitting hinge isrough surface finish.
• The surface finish on steel usually will be poor.
• The rounded upper surface of the fill bars and the smooth surface finish facilitate cleaning.
• By default, no parameters are included when a surface finish indicator is first placed.
• At the same time, it still has reasonable machinability and excellent surface finish.
• Accurately position to allow for surface finish thickness.
• Is the material type and hardness stamped on bottom surface of each cavity bloc Yes No What is the required surface finish on the cavit What is the cavity surface finish?
• This was especially noted in the large Class IV and veneer restorations where surface finish degradation is obvious and impacts the acceptance of the restorations by the patient.
• Unless it must be trade show grade, go with function rather than flashy for your surface finish.
• Show construction joints with a roughened surface finish unless shear keys are required and shown on the plans.
• HyperCut guarantees the fastest possible machining speed while maintaining minimal electrode wear without affecting the desired accuracy or surface finish.
• Later editions of the Handbook will include a more accurate method for estimating the insertion loss as a function of plenum dimensions and interior wall surface finish.
• The surface finish shows a measureable effect.
• They demonstrated that the square textured tool showed better performance in comparison with the linear textured tool in terms of cutting forces and surface finish.
• Finally the surface finish of the casting is analysed using the comparator.
• The surface being tested generally requires a metallographic finish; the smaller the load used, the higher the surface finish required.
• Outstanding surface finish, good UV resistance and excellent mechanical properties are also claimed.
• According to injection and the surface finish to check them for rust in assembly?
• Surface finish is often a function of process time.
• Customers can specific their desired color of the products, and even whether the surface finish should be matte or glossy.
• Cold rolled steel is a product that has been cold reduced, as opposed to hot rolled, in order to impart specific mechanical properties, surface finish, gauge tolerance and strip shape.
• Choose from a range of styles to get a smooth surface finish every time.
• Formed surface Finish: Smoothformed finish for concrete exposed to view, coated, or covered by waterproofing or other directapplied material; roughformed finish elsewhere.
• The mechanicsg a good surface finish have been covered inachining section but it is important to know how tomeasure the surface finish of a Thordon bearing.
• Olivine is usedbecause ofthe superior surface finish it provides to he aluminum casting and its ease of use, when compared to other foundry aggregatesphysical and chemical characteristicslivine is not
• Previously, turning operation was carried out on lathe machine and then it was transferred to the grinding machine for surface finish.
• Disclosed is a new and improved method and apparatus for automatically lapping a ball and a seat of a valve to produce a nonflat lapped sealing surface finish that provides a reliable fluid seal at mi
• The pressure of the burnishing tool or tools improves the surface finish of the gear teeth and can roll down the burrs or nicks that occur during handling.
• Face Seal controls both the sealing surface finish and hardness and is manufactured to ride on a supplied face plate.
• Analyze the functionality and the geometry of printed parts to specify where the fatigue can happen for a particular temperature and surface finish.
• Entering a Cut While you will often see programs and machinists that take the cutter straight into the material to begin a cut, this is not the best approach for cutter life and surface finish.
• Structures shall be of uniform colour and surface finish.
• The coating will be thicker while the surface finish will be darker due to the coating consisting out of zinc and iron.
• The higher reduction resulted in a finer surface finish on the inside diameter.
• Surface finish for Precast Members The standard specifications requires a light broom finish on the tops of members having an asphalt wearing surface and a roadway finish for members having a HPC deck
• Discuss the kind of surface finish that you want.